AWA lab results

    AWA was tested by Hill Laboratories, an independent lab in Hamilton accredited by IANZ. The sample from our filling room measured pH 9.4. Below is every result on the certificate, and the certificate itself.

    Lab number 2536901. Sampled 23 February 2021, reported 3 March 2021. A new test is under way and will be posted here when it's back.

    Main results

    pH at the filling room
    9.4
    pH at the filling room
    total alkalinity, g/m³
    188
    total alkalinity, g/m³
    silica, g/m³
    22
    silica, g/m³
    calcium hardness, g/m³
    2.8
    calcium hardness, g/m³

    Every result on the certificate

    g/m³ is the same as milligrams per litre.

    TestFilling roomBore
    TurbidityNTU0.600.52
    pHpH units9.49.6
    Total alkalinityg/m³ as CaCO₃188189
    Calcium hardness*g/m³ as CaCO₃2.83.0
    Magnesium hardness*g/m³ as CaCO₃< 1.0< 1.0
    Electrical conductivity (EC)mS/m44.044.4
    Total dissolved solids (TDS)g/m³270260
    Total borong/m³0.0530.056
    Total calciumg/m³1.131.21
    Total magnesiumg/m³0.0480.049
    Total manganeseg/m³0.000640.00179
    Total potassiumg/m³0.290.26
    Total sodiumg/m³97100
    Bromideg/m³0.110.11
    Bromateg/m³< 0.005< 0.005
    Chlorideg/m³2727
    Reactive silicag/m³ as SiO₂2222
    Sulphateg/m³0.6< 0.5
    Escherichia coli (E. coli)MPN / 100 mL< 1 †< 1 †

    † Analyst's comment: please interpret this result with caution as the sample was above 10 °C on receipt at the lab. The lab's reference methods recommend under 10 °C on receipt, but acknowledge that samples taken quickly to the lab may not have been cooled to this temperature.

    * Calculated, not accredited. Hill Laboratories is accredited by International Accreditation New Zealand (IANZ). The other tests were performed under that accreditation.

    What the main results mean

    pH
    7 is neutral and anything above 7 is alkaline. The filling room sample was 9.4 and the bore 9.6.
    Total alkalinity
    How much the water holds its pH. 188 g/m³, the same at the bore and the filling room.
    Total dissolved solids
    Everything dissolved in the water, about 270 g/m³. It's what gives water its taste.
    Hardness
    Calcium hardness of 2.8 g/m³ makes AWA very soft water.
    Silica
    22 g/m³, picked up from the volcanic rock the water filters through.
    E. coli
    Less than 1 per 100 mL means none was found. The lab added a note that the sample arrived warmer than its methods recommend, shown under the table.

    The certificate

    Both pages of the original Hill Laboratories certificate of analysis.

    Open the certificate (PDF)
    Hill Laboratories certificate of analysis 2536901, page 1 of 2Hill Laboratories certificate of analysis 2536901, page 2 of 2

    Questions

    Hill Laboratories in Hamilton, an independent lab accredited by International Accreditation New Zealand (IANZ). Lab number 2536901.

    One was taken straight from the bore, the other from the filling room where the bottles are filled. The filling room result is the water that goes into your bottle.

    It can move a little with the seasons. The filling room sample measured pH 9.4, which is the figure we use.

    A new Hill Labs test is under way. We'll post it on this page as soon as the results are back.

    Try it for yourself

    Delivered free in Auckland, usually within 72 hours, or pick it up from 18 stores across Auckland, Waikato and Mt Maunganui.